MAS Type 4, 5, 6
MAS BG 4, 5, 6
Description:
  • self-priming
  • without shaft seal
  • streamlined spiral housing made of PP or ETFE
  • volume flow of up to 470 l/min
  • delivery head of up to 27m.WG
  • back pull-out

   Technical characteristics

Size Type 4 - 13/115 Type 5 - 17/230 Type 6 - 27/470
Material PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced)
Max. delivery head in [m.WG] 50 Hz 13 17 27
Max. volume flow in [l/min] 50Hz 115 230 470
Max. density in [g/cm3] 50Hz ** 1.8 1.8 1 1.4 1.15 1.6 2
Motor capacity in [kW] 0.75 0.75 1.1 2.2 3 4
Current rating (400V, 50Hz) in [A] 1.56 1.56 2.25 2 5.6 7.3
Rated speed in [rpm] at 50Hz /60Hz 3000/3600
Suction port DN 25 (Type 4) / DN 40 (Type 5) / DN 50 (Type 6)
Discharge port DN 25 (Type 4) / DN 40 (Type 5) / DN 50 (Type 6)
Voltage in [V] 230/400V CA triphasé
Protection class IP 55
Max. flow velocity in [m/s] côté aspiration = 1 / côté refoulement = 3
Approx. weight for PP/ETFE in [kg] 24 26 29 42 54 62
Max. temperature for PP/ETFE in [°C] 70/60
Max. system pressure for PP/ETFE at 20°C in [bar] 2 2.2 4 4 5.2

* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)

   Performance charts

    Dimension sheet

   Accessories

Motor accessories

  • ON/OFF switch with 2.5m cable and plug (230V AC only)
  • 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
  • Frequency converter of IP class 65, mounted directly to the motor or for wall mounting

Slip-on flanges

to screw onto threaded ports including O-rings *

Losflansche MAGSON 5

Thread adapters

to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *

Hose connections

Three-piece hose connections with spigot nut and hose nipple.

Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!