Datasheet_MagsonMA-5(EN)_2022-08.pdf 
MA Type 5H
Technical characteristics
| Size | 24/200 | ||
|---|---|---|---|
| Material | PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) | ||
| Max. delivery head in [m.WG] 50 Hz | 24 | ||
| Max. volume flow in [l/min] 50Hz | 200 | ||
| Max. density in [g/cm3] 50Hz ** | 1.25 | ||
| Motor capacity in [kW] | 1.1 | ||
| Current rating (400V, 50Hz) in [A] | 2.25 | ||
| Rated speed in [rpm] at 50Hz /60Hz | 3000/3600 | ||
| Suction port | DN 25*** | ||
| Discharge port | DN 25*** | ||
| Voltage in [V] | 230/400V CA triphasé | ||
| Protection class | IP 55 | ||
| Max. flow velocity in [m/s] | côté aspiration = 1 / côté refoulement = 3 | ||
| Approx. weight for PP/ETFE in [kg] | |||
| Max. temperature for PP/ETFE in [°C] | 70/80 | ||
| Max. system pressure for PP/ETFE at 20°C in [bar] | 3,2 | ||
* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)
Performance charts
Dimension sheet
Accessories
Motor accessories
- ON/OFF switch with 2.5m cable and plug (230V AC only)
- 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
- Frequency converter of IP class 65, mounted directly to the motor or for wall mounting
Slip-on flanges
to screw onto threaded ports including O-rings *
Thread adapters
to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *
Hose connections
Three-piece hose connections with spigot nut and hose nipple.
Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!